UNISILKON LCA 3801

产品编号: 022100 Special lubricating grease for drinking water valves and non-metallic material combinations

UNISILKON LCA 3801 is a special lubricating grease neutral in odour and taste and based on silicone oil and a calcium soap. It has been developed primarily for valves and fittings as well as sanitary applications. UNISILKON LCA 3801 provides effective wetting even in narrow lubricating gaps and friction points that are difficult to reach.

Uniform operational smoothness is achieved with cold or hot water as the viscosity is not strongly influenced by changing temperatures, e.g. in single-lever mixers with specific surface pressures up to approx. 4 N/mm², depending on the design of ceramic cartridges.

UNISILKON LCA 3801 is resistant to many media used in the beverage industry and to acid or alkaline disinfectants but not resistant to most organic solvents and strong acids or lyes.

关于安全数据表的重要提示 / 免责声明

本下载区域提供的安全数据表 (SDS) 仅供一般信息参考。由于技术更新,我们无法保证在线提供的文件始终反映最新状态。

唯一具有法律效力的版本是购买或交付商品时直接传送给您的安全数据表。本文件包含适用于您所收到产品的特定安全信息。

请在使用前核对所有下载的文件与随货提供的文件是否一致。对因使用过时的在线版本而造成的损害,我们不承担任何责任,除非该损害是由于我们故意或重大过失造成的。

如果您不确定是否拥有最新版本或需要更新文件,请随时联系我们的客户服务: MCM.China@cn.klueber.com

UNISILKON LCA 3801

产品应用

  • For all types of material combinations like ceramics/ceramics, metal/plastic or elastomers
  • With load-bearing areas between 50 and 99.9 %, good wetting behaviour and good adhesion to different material surfaces, the product ensures consistent smooth operation over the entire lifetime of the component
  • Operating torque nearly constant under changing temperatures, enabling constant smooth operation up to an admissible surface pressure of approx. 4 N/mm²
  • Very good resistance to both cold and hot water
  • Good thermal stability even when applied in a thin film ensures a long functional lifetime of ceramic disc cartridges
  • Good sealing effect and backflow from "lubricant depot"
  • Compatible with most ceramics, metals, elastomers and plastics
  • Approved acc. to BWGL-KTW (UBA guideline), NSF/ANSI/CAN 61, ACS (further approvals on request) for use in all friction points exposed to water or in permanent contact with drinking water

保持联系

我们期望收到您的信息

有关使用联系表格处理您的数据的进一步信息,请参阅我们的 隐私政策

WeChat