Klübersynth GEM 4-320 N

产品编号: 20221114 Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology

Klübersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on polyalphaolefin satisfying the growing requirements and increasing power density of modern gears. Klübersynth GEM 4 N includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.

Klübersynth GEM 4 N clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klübersynth GEM 4 N without prior consultation with the gear manufacturer provided the general application notes are observed.

Klübersynth GEM 4 N offers high scuffing load capacity. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. The oil's high micropitting resistance of GFT ≥ 10 according to FVA 54/7 (tested at 90, 60 and 40 °C) offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.

Klübersynth GEM 4 N offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation. Freudenberg seals made of 72 NBR 902, 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are statically and dynamically resistant to Klübersynth GEM 4 N. Leakage and oil contamination are prevented.

The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications.

The optimised friction behaviour enabled by the carefully selected base oils and additives reduces power losses and improves application efficiency. This leads to lower oil temperatures and reduced energy consumption.

Examination on a test rig showed that for spur gears a reduction of the oil temperature from 85 °C with conventional oil (mineral oil) to 80 °C with Klübersynth GEM 4 N is possible.

Conventional gear oil (1) vs. Klübersynth GEM 4 N (2)

Klübersynth GEM 4-320 N

产品应用

  • High scuffing protection

  • Excellent wear protection for gears and rolling bearings

  • Good shear stability for reliable lubricant film formation

  • High micropitting resistance

  • Excellent ageing and oxidation resistance

  • Wide service temperature range due to good viscosity-temperature behaviour

  • Low foaming tendency

  • Energy savings due to optimised friction behaviour

  • Good elastomer compatibility

  • Approvals by numerous gear OEMs

保持联系

我们期望收到您的信息

有关使用联系表格处理您的数据的进一步信息,请参阅我们的 隐私政策

WeChat